yband therapy ARYS tracker charger, User Manual

Page: 21 / 70

| 21 |
app | re-registration
1 2
Registration
Existing account
English
Welcome!
Nice to meet you! To enjoy all that
ARYS™ me has to offer please
register or use your existing
account.
Next
Bluetooth® On Off
Enable Bluetooth®
To pair an ARYS™ me | Tracker you need to
enable Bluetooth® on your smartphone.
Existing account 1/4
Back
3
/
4
/
5
ARYS™ me | Tracker
Serial no. 17000001
ID code –
Remove pairing
Next
Search again
Pair your tracker
Press and hold the button on the tracker
for at least 5 seconds until the LED lights
turn blue and starts blinking.
Existing account 2/4
Back
Re-registration
In some cases, you may have to re-register your profile (e.g. new smartphone). As you
already have a verified user account, the registration process is slightly different here:
Smartphone and tracker are in close proximity
1. On the Welcome screen, you can start the registration
process by choosing your language and
pressing the «Existing account» button.
2. Enable Bluetooth
®
and press «Next». In order to pair
the tracker, press and hold the button on the ARYS
TM
me
tracker for at least 5 seconds until the LED turns blue
and starts flashing. This activates the pairing mode of
the tracker. The app now automatically searches for
ARYS
TM
me trackers.
3. If an ARYS
TM
me tracker is found, it will be displayed
above the search area. You can pair the specific tracker
by pressing the «Pair» button. The Status LED of the
tracker flashes blue while in pairing mode.
4. If the pairing was successful, this is indicated on the
screen. After a successful pairing, the tracker vibrates
and the LED turns constantly blue for 4 seconds before
going out.