background image

Device Manual

!

The estimated charging time to fully charge the device is 7 to 8 hours from completely discharged. 

The device can be used whilst charging, however, the charging cycle will complete more quickly if the 

device is deactivated. The device can be used with a partially charged battery. 

!

NOTE: If left plugged in, the battery will automatically cycle between around 90% and 100%. This is in order 

to protect the health of the Lithium Ion battery inside, and maintain the life of the devices. 

!

Your device is now ready for use. You can turn it on by pressing and holding the OK button for 5 

seconds. 

!

Sending a basic alert 

!

The alert button is located under the flap at the bottom of the unit. To trigger an alert, lift the flap and 

hold down the alert button for 5 seconds. The screen will display ‘Sending Alert’ and the device will 

try to transmit an alert message. 

!

If you are in an alert situation, ensure that you give your alert the best possible chance of sending by 

considering the orientation of the device. Ensure it has a good view of the sky, or as good a view as is 

possible in your situation. The better the view of the sky, the more likely it is that your alert 

will be received. 

!
!

5

Summary of Contents for Mk3

















Reviews: