background image

Device Manual

The behaviour of many features of your device, including the alert features, is configured by changing 

settings in the management system. 

!

Orientation 

!

Your unit is equipped with both Iridium & GPS antennas located at the top of your casing. For the best 

results it is important to be mindful of the orientation of your device when in use. To ensure good 

satellite signal, the antennae should be clear of obstructions and have a clear view of the sky. 

!

Examples of obstructions include a heavily wooded area or inside a vehicle or building. Environments 

such as these offer very little, if any, view of the sky. In these instances, it would be best to reposition 

your device so that it can have a clear view of the sky, such as in a clearing, on the dashboard or 

rear window of a car or on a windowsill. 

!

Once switched ON, your device will try to obtain a GPS signal. The time taken to obtain a signal will 

vary from few minutes when the device has never been used or not been used for a while to few 

seconds when the device is regularly used. 

!

Charging and Switching On 

!

The device has an internal rechargeable battery which must be charged before use. Before the first 

use we recommend the device is left on charge for a minimum of 8 hours. 

!

Your Device can be charged from any USB compatible charging device, although we recommend you 

use the provided charger whenever possible. 

!

To charge the unit: 

!

• Connect the charger to a wall outlet 

• Attach the USB cable to the charger 

• Unscrew the cap from the bottom to reveal the USB port 

• Plug the USB cable into the USB port on the bottom of the dev ice 

!

When charging the light on the front of the keypad will be red. The red light will flash for 5 minutes 

when the unit has finished charging, and will then go off. 

4

Summary of Contents for Mk3

















Reviews: