Device Manual
The YB Connect / Rock Connect app is available from the App Store, and allows you to configure your
device settings, plus you can use it to send/receive short text-based emails and SMS messages.
!
More information on the app can be found in the separate app guide, available on our website.
!
Note, you will receive an email address for your ‘app’ which is different from your ‘device’ email address. This
is because multiple people can use the same device with their own app, and so each ‘app’ account has to have
its own specific email address.
!
!
Messages Menu
!
New Message
!
From this menu you can choose to send a new preset message
!
Messages sent using the device will go to your chosen destinations which are pre-setup using either
your YBlog (individual customers) or ‘Core’ management system (corporate customers).
!
You can choose whether you would like an acknowledgement from the recipient, and if you wish to
send the message immediately (or if not, the message will be sent on the next scheduled
transmission).
!
When you are finished choosing/writing your message, pressing OK will put the message into the
outbound queue ready to send.
!
Remember - if you chose the ‘Send Immediately’ option then the device will try to send straight away.
If not, then the unit will queue the message and attempt send it at the same time as the next
scheduled position report.
!
10
