9
GB
O R I G I N A L I N S T R U C T I O N S
Laser pointer self-levelling
Caution! Use the laser pointer self-levelling feature only when the tripod threaded nut is vertically downward. Any other orientation
will be indicated by the product as a self-levelling range overrun.
Moving the power switch to the ‘open padlock’ starts the laser pointer self-levelling feature. If the product is oriented at an angle
within the laser pointer self-levelling range, the projected laser lines are levelled automatically.
If the projected laser lines are fl ashing, the product is oriented at an angle outside of the laser pointer self-levelling range and
self-levelling will not be eff ective. Reposition the product within the laser pointer self-levelling range so that the projected laser
lines stop fl ashing.
Mounting the product on a tripod
The product base has two threaded holes for mounting on a tripod (not included) or the base (included with the product).
If you want to use the base included with the product, screw its threaded stud into the larger threaded nut at the product’s bottom.
The base provides precise panning (rotation on the horizontal plane) of the mounted product. The scale shows the angle of
rotation.
The base facilitates lifting and lowering the product by operating the lifting dials at the back of the base.
The back of the base features strong magnets to facilitate attachment to any surface made of a ferromagnetic material. The top of
the base back features a spirit level to control the level.
Consult the tripod operating instructions before mounting the product.
Use of the product
When using the product outdoors or in strong light, e.g. direct sunlight, the range of laser beam projection and the visibility of laser
beams could be reduced.
An example of the use of the product is shown in the fi gures (V).
MAINTENANCE AND STORAGE
Having fi nished your work with the product, wipe it clean with a soft and slightly damp cloth. Next, wipe dry with a soft cloth or
leave to dry. Do not immerse the product in water. Do not clean with solvents, corrosive chemicals, alcohol, gasoline or abrasive
products (e.g. scouring cream). Store the product in a dry, well-ventilated indoor room, away from sunlight. The storage location
should not be accessible to children or anyone not authorized to operate the product. Other storage conditions should be as the
operating conditions. Remove the batteries before prolonged storage.
Summary of Contents for YT-30425
Page 13: ...13 RUS III 90 III 90 V...
Page 15: ...15 UA V...
Page 37: ...37 GR III 90 IV 90 18001 V...
Page 38: ...I N S T R U K C J A O R Y G I N A L N A 38...
