5 Installation Procedure
YASKAWA ELECTRIC
TOBP C730600 86F YASKAWA AC Drive Option SI-T3 Installation Manual
23
5.
Route the option wiring inside the enclosure as shown in
-B. Take proper
precautions so that the front covers will easily fit back onto the drive.
Users may also choose to route the option wiring through openings on the front
cover of some models. Remove the perforated tabs on the left side of the front cover
as shown in
-A to create the necessary openings on these models.
Refer to the Peripheral Devices & Options section of the drive instruction manual for
more information.
Note: 1.
Separate communication cables from main circuit wiring and other electrical lines to avoid potential
sources of electrical interference.
2.
Connect the terminator (model No.: JEPMC-W6022-E) to the option modular connector (CN3) on the
end drive of the communication lines.
Figure 11
Figure 10 Wire Routing Examples
B
A
TOBP_C730600_86F_7_0_E.fm 23 ページ ２０１８年１２月２０日 木曜日 午後６時１６分
