YASKAWA SI-P3V, Technical Manual

Page: 27 / 40

8 Parameter Process Data Object Formats
YASKAWA ELECTRIC SIEP C730600 23B V1000 Option PROFIBUS-DP Technical Manual 27
„
IND
„
PWE
„
STW/ZSW
Bit PPO Write PPO Read
0
Sub-Index for parameter number Sub-Index for parameter number
1
2
3
4
5
6
7
8
Reserved Reserved
9
10
11
12
13
14
15
Bit PPO Write PPO Read
0 to 31 Setting Data
Error code when Response ID is 7
0: Incorrect PNU number
1: Write mode error
2: Lower or upper limit violated
3: Disabled IND is set
17: Write mode error during Uv condition or Write mode error during
parameter processing
Bit PPO Write PPO Read
0
<1> This is the setting value for d1-17 in drives running software version 2102 and later. The software version appears on the drive nameplate,
indicated by "PRG".
OFF1: reserved Ready to switch on: always 1
1 OFF2: reserved Ready: always 1
2 OFF3: reserved
0: Not ready
1: Drive ready
3
Enable to RUN
0: Bas Stop
1: Not Baseblock
0: No fault condition
1: Fault condition
4
0: STOP
1: RUN
Always 1
5 Ramp function generation enable: reserved Always 1
6 Enable ramp function generator set-point: reserved Switch-on inhibit: always 0
7 1: Fault Reset
0: No alarm condition
1: Alarm condition
8
0: Stop
1: JOG RUN forward (Fmax/10 speed)
<1>
0: No speed agree
1: Speed agree condition
9
0: Stop
1: JOG RUN reverse (Fmax/10 speed)
<1>
0: Local control
1: Control from PROFIBUS
10
0: Local control
1: Control from PROFIBUS
Always 0
11
Reserved
12
13
14
15