72
YASKAWA
TOEP C730600 89B PROFINET Installation Manual
◆
EMC Directive Compliance
This option is tested according to European standard EN 61800- 3:2004/A1:2012 and
complies with the EMC Directive. The CE marking is declared based on the harmonized
standards.
■
Option Installation
Verify the following installation conditions to make sure that other devices and machinery
used with this option and drive also comply with EMC guidelines:
1.
Use dedicated shield cable for the option and external device (encoder, I/O
device, master), or run the wiring through a metal conduit.
2.
Keep wiring as short as possible and ground the largest possible surface area of
the shield to the metal panel according to
and
Figure 10.2 Option Installation for CE Compliance: 1000-Series, GA700, GA800,
CR700, CH700
