7 Procedure B
36
YASKAWA
TOEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Installation Manual
6.
Select one of the four different length ground wires packaged with the option,
. Choose the proper ground wire by test fitting the screw (size M3.5 to M6)
into each of the four drive-side ground ring lugs prior to installation. Ground wire
selection varies by drive model.
Figure 30
Figure 30 Ground Wire Selection
7.
Connect the ground wire to the drive using the lower right screw that fastens the
drive to the case.
Tool tip:
Use a long-shaft Phillips screwdriver. A magnetic tip screwdriver will aid in
keeping the screw captive during removal and installation.
Figure 31
Figure 31 Drive-side Ground Wire Connection
To Option ground screw FE
Screw size: M3
To drive ground terminal
Screw size: M3.5 to M6
Ground Wire
Lower-right screw
NEMA 4X Drive
Ground wire
Drive-side
ground terminal
Screw size:
M3.5 to M6
Option ground
screw FE
Screw size: M3
Long-shaft magnetic
tip screwdriver
