For the cabling of power supplys a green plug with CageClamp technology is deployed.
1
AC IN 100 ... 240V
2
DC OUT 24V
The picture on the left side shows the cabling step by step from top view. Here wires with
a cross-section of 0.08mm
2
to 2.5mm
2
may be connected. You can use flexible wires
without end case as well as stiff wires.
1.
For cabling you push the locking vertical to the inside with a suiting screwdriver and
hold the screwdriver in this position.
2.
To open the contact spring you have to push the screwdriver in the opposite direc-
tion and hold it. Insert the de-isolated wire into the round opening.
3.
By removing the screwdriver the wire is connected safely with the plug connector
via a spring.
CageClamp technology
(gray)
VIPA System 300
Assembly and installation guidelines
Cabling
HB130 | PS | 307-1xA00 | en | 18-01
12
