YASKAWA PROFINET 1000 Series Page 6 Technical Manual Download

Page: 6 / 62

YASKAWA

SIEP YEACOM 07A 1000-Series Option PROFINET SI-EP3 Technical Manual

2 Product Overview

Product Overview

About This Product

The SI-EP3 option connects the 1000-series drives to a PROFINET network and facilitates the exchange of data.

This manual explains the handling, installation and specifications of this product.

The SI-EP3 option is a simple, networking solution that reduces the cost and time to wire and install factory automation
devices, while providing interchangeability of like components from multiple vendors.

By installing the option to a drive, it is possible to do the following from a PROFINET master device:

• Operate the drive
• Monitor the operation status of the drive
• Change parameter settings.

SI-EP3 is PROFINET Conformance Class A certified.

Applicable Models

The option can be used with the drive models in

Table 1

Table 1 Applicable Models

Drive Series

Drive Model Number

Software Version

<1>

<1> See “PRG” on the drive nameplate for the software version number.

A1000

CIMR-A

VSA90101

CIMR-A

VSA90504

VSA90101

CIMR-A

4A0930~1200

VSA903014 and later

iQpump1000

CIMR-PW2A

VSA8550 and later

CIMR-PW4A

CIMR-PW5A

CIMR-PW4A0930~1200

VSA903750 and later

P1000

CIMR-PU2A

VSA8500 and later

CIMR-PU4A

CIMR-PU5A

CIMR-PU4A0930~1200

VSA903700 and later

Summary of Contents for PROFINET 1000 Series































































Search results

Summary of Contents for PROFINET 1000 Series

Reviews:

Related manuals for PROFINET 1000 Series

Brands by name

Popular brands

YASKAWA PROFINET 1000 Series, Technical Manual

Search results

Summary of Contents for PROFINET 1000 Series

Reviews:

Related manuals for PROFINET 1000 Series

Brands by name

Popular brands