background image

   

E-12

Warranty

Details of Warranty

Warranty Period

The warranty period for a product that was purchased (hereinafter called “deliv-
ered product”) is one year from the time of delivery to the location specified by 
the customer or 18 months from the time of shipment from the Yaskawa factory, 
whichever is sooner.

Warranty Scope

Yaskawa shall replace or repair a defective product free of charge if a defect 
attributable to Yaskawa occurs during the warranty period above. This warranty 
does not cover defects caused by the delivered product reaching the end of its 
service life and replacement of parts that require replacement or that have a lim-
ited service life.
This warranty does not cover failures that result from any of the following causes.

Improper handling, abuse, or use in unsuitable conditions or in environments 
not described in product catalogs or manuals, or in any separately agreed-
upon specifications

Causes not attributable to the delivered product itself

Modifications or repairs not performed by Yaskawa

Use of the delivered product in a manner in which it was not originally intended

Causes that were not foreseeable with the scientific and technological under-
standing at the time of shipment from Yaskawa

Events for which Yaskawa is not responsible, such as natural or human-made 
disasters

Limitations of Liability

Yaskawa shall in no event be responsible for any damage or loss of opportu-
nity to the customer that arises due to failure of the delivered product.

Yaskawa shall not be responsible for any programs (including parameter set-
tings) or the results of program execution of the programs provided by the user 
or by a third party for use with programmable Yaskawa products.

The information described in product catalogs or manuals is provided for the 
purpose of the customer purchasing the appropriate product for the intended 
application. The use thereof does not guarantee that there are no infringe-
ments of intellectual property rights or other proprietary rights of Yaskawa or 
third parties, nor does it construe a license.

Yaskawa shall not be responsible for any damage arising from infringements of 
intellectual property rights or other proprietary rights of third parties as a result 
of using the information described in catalogs or manuals.

Summary of Contents for MP3100 Series


























Reviews: