YASKAWA MP2600iec, Hardware Manual

Page: 30 / 42

9.3 Ethernet Cable
28
9.3 Ethernet Cable
For the Ethernet cable, use a twisted pair cable with RJ-45
connector. Yaskawa strongly recommends the use of shielded
ethernet cables. Ethernet ports are capable of auto-crossover, so
crossover cables are not necessary.
9.4 Ethernet Connection Examples
Connection Example 1 (
When using a repeater HUB)
Specification
Item
When Connecting to a
Ethernet Switch
Cable Length between Node-HUB 100 m or less
Cable Length between HUBs 100 m or less
Number of HUBs between Nodes Unlimited
100Base-TX
Ethernet Switch
SGDV with
MP2600iec
100Base-TX
Ethernet Switch
100Base-TX
* Note: The MP2600iec can only be plugged into
a 100Base-TX Ethernet port.
Station*
Station* Station*
Up to 100m
Up to 100m
Up to 100m
Up to 100m
Up to 100m
Station*
Up to 100m