YASKAWA MP2600iec, Hardware Manual

Page: 23 / 42

S11
DHCP
EINIT
CNFG
INT
SUP
STOP
NO
6.1 Switch Settings
21
6 DIP Switches
6.1 Switch Settings
Switch Name Setting Operating Mode Default Details
1
STOP
ON User program stopped
OFF
Stops the user program execution.
OFF User program running
2 SUP
ON Firmware Load
OFF
If set to ON, the controller boots up in the
mode that can upgrade the firmare. See
Section 17.
OFF Normal Operation
3 INIT
ON
For diagnostic
purposes only
OFF
Always set to OFF.
OFF
For diagnostic
purposes only
4 CNFG
ON Self-configuration Mode
OFF
Set to ON to execute self-configuration for
connected devices and option card.
OFF Normal Operation
5 E-INIT
ON
Force Ethernet address
setting for Port A to
192.168.1.1 and Port B
to 192.168.2.1
OFF
When ON, transmission parameters such as
an IP address are set to default at startup
(192.168.1.1.).
OFF Normal Operation
6 DHCP
ON DHCP
OFF
Obtain IP settings from DHCP server
OFF Static IP Manual configuration of IP settings