4
I/O Signal Allocation
4.3
Setting of AB3602 Board Communication Condition
4-32
HW1484564
HW1484564
4.3
Setting of AB3602 Board Communication Condition
When using AB3602 board, the network is necessary to be configured
with AnyBus NetTool for PROFIBUS (HMS made) (hereinafter referred to
as NetTool).
Followings are the outline of the network configuration when A3601 (IN:
16 Byte, OUT: 6 Byte) is regarded as a slave.
For the details of the settings, please refer to the documentations attached
to NetTool.
1. Install NetTool on the PC.
2. With the serial cable, connect the PC and the AB3602 which is
mounted to the YRC1000micro.
3. Turn ON the power supply while pressing [MAIN MENU]
simultaneously.
4. Start-up NetTool.
– The following window appears.
– All the subsequent procedures are operated on the NetTool window.
5. Select {Project}
-
{New}.
– A new configuration window appears.
52/60
