4
I/O Signal Allocation
4.1
Setting of Option Board and I/O Module
4-7
HW1484564
HW1484564
11. Select {YES}.
– Select {YES} if the display corresponds to the current mounted
status of the I/O modules. The I/O module setting is updated, and
the IO MODULE window changes to the EXTERNAL IO SETUP
window.
12. The EXTERNAL IO SETUP window appears.
13. Select “AUTO” or “MANUAL” in the ALLOCATION MODE.
– The selection menu appears after selecting “AUTO” or “MANUAL”.
NOTE
If the allocation mode is changed from “MANUAL” to
“AUTO”, the set allocation data is discarded. The data will
be allocated by AUTO MODE again. Save the set alloca-
tion data to the external devices in advance, if needed.
27/60