MOTO
MAN
5-1
MH-Series Positioner Manual with MotoMount
SECTION 5
TOOLING RECOMMENDATIONS
Installation of tooling and fixtures should be performed by personnel who are
familiar with the operation of this system. Tooling and fixtures are supplied by the
customer.
There are two system configurations possible with the MH-series positioners:
headstock only and headstock/tailstock with MotoMount. To ensure optimal
performance from your MH-series tooling system, Motoman makes the following
recommendations for each configuration.
5.1
Headstock Only – Tooling Recommendations
The stand-alone headstock assembly provides the only support for tooling and
production parts. Proper tooling design directly effects the headstock performance
and longevity. All tooling practices apply to the headstock assembly whether it is
accompanied by a column or not.
Figure 5-1 Headstock Assembly – Type I
Figure 5-2 Headstock Assembly – Type II
HOUSING
COLUMN
FACEPLATE
AC SERVO
MOTOR
FACEPLATE
HOUSING
