1
Manual Brake Release Function
1.2
Activating the Manual Brake Release Function
10
162181-1CD
162181-1CD
FS100
4. Loosen the thumb-screw located next to the CN210 label, and raise
the door.
1.2.1
Single Robots:
5. Install the interlock connector FBB-CN210 into connector CN210 as
shown below.
1.2.2
Dual Robots:
5. For dual robot controllers (such as DRC’s, SDA5F, SDA10F, and
SDA20F) there are two CN210 connectors, one for each robot or
group of axes. Install FBB-CN10 into the controller of the robot or
group of axes that needs to be released. If two FBB-CN210’s are
available, they can both be installed, making all axes available for
release at the same time.
OR