1
Manual Brake Release Function
1.3
Manual Brake Release Procedure
14
162181-1CD
162181-1CD
FS100
– If the E-axis, the first external axis, or the second external axis (the
seventh or eighth axis) is selected, the brake is released and the
BRAKE STATUS is displayed.
BRAKE STATUS
: Brake locked
:Brake released
– The brake is locked with one of the following conditions:
• [SELECT] is released. (See the CAUTION box below.)
• The emergency stop button on the programming pendant, the
FS100 (optional), or the external device is pressed.
• The enable switch is not in the middle (teach) position.
• The window is switched from the MANUAL BRAKE RELEASE
window to another.
• The interlock connector FBB-CN210, is removed.
4. Select {YES} in the selection dialog box.
– Select {NO} or press [CANCEL] to close the confirmation dialog box
without releasing the brake.
After that, press the interlock key
+ [SELECT] while gripping the
enable switch to display the confirmation dialog box again. Proceed
to step 4.
CAUTION
•
The brake is released by pressing the interlock key
+ [SELECT]
while gripping the enable switch. At this time, note that the brake
remains released when the interlock key
is released.
INTER
LOCK
INTER
LOCK
INTER
LOCK
