OPERATION
MOTO
MAN
5-3
ArcWorld IV-6200 XHD DR2C System Manual
IN#017
SWEEP LOCK ENGAGED TAILSTOCK
Signal from switch S1S in positioner
tailstock
IN#018
SWEEP LOCK DISENGAGED TAILSTOCK
Signal from switch S1R in positioner
tailstock
IN#019
SWEEP LOCK ENGAGED HEADSTOCK
Signal from switch S1S in positioner
headstock
IN#020
SWEEP LOCK DISENGAGED HEADSTOCK
Signal from switch S1R in positioner
headstock
IN#021
AIR PRESSURE LOW
Signal indicating low air pressure from
switch SB1 in positioner headstock
IN#022 thru 024
NOT USED
Table 5-2 XRC 2001 User Outputs
Output
Assignment
Description
OUT#001 thru 008
NOT USED
OUT#009
CYCLE LATCHED
Cycle start latched
OUT#010
NOT USED
OUT#011
R2 SCHEDULE SELECT BIT A
Refer to Miller manual for schedule
select description if applicable.
OUT#012
R2 SCHEDULE SELECT BIT B
Refer to Miller manual for schedule
select description if applicable.
OUT#013
R2 SCHEDULE SELECT BIT C
Refer to Miller manual for schedule
select description if applicable.
OUT#014
R1 SCHEDULE SELECT BIT A
Refer to Miller manual for schedule
select description if applicable.
OUT#015
R1 SCHEDULE SELECT BIT B
Refer to Miller manual for schedule
select description if applicable.
OUT#016
R1 SCHEDULE SELECT BIT C
Refer to Miller manual for schedule
select description if applicable.
OUT#017
ENGAGE SWEEP LOCK TAILSTOCK
Engage sweep lock pins in position to
prevent inadvertent motion.
OUT#018
DISENGAGE SWEEP LOCK TAILSTOCK
Disengage sweep lock pins to allow for
main trunion motion.
OUT#019
ENGAGE SWEEP LOCK HEADSTOCK
Logic relay
OUT#020
DISENGAGE SWEEP LOCK HEADSTOCK
Logic relay
OUT#021 and 022
NOT USED
OUT#023
MOTION OVERRIDE
Used to override illegal motion alarm
OUT#024
NOT USED
Table 5-1 XRC 2001 User Inputs - continued
Input
Assignment
Description
