YASKAWA MECHATROLINK-III, Installation Manual

Page: 10 / 41

10 YASKAWA ELECTRIC TOBP C730600 63C V1000 Option SI-ET3/V Installation Manual
2 Overview
2 Overview
The MECHATROLINK-III option provides a communications connection between the drive
and a MECHATROLINK-III network. The option connects the drive to a
MECHATROLINK-III network and facilitates the exchange of data.
This manual explains the handling, installation and specifications of this product.
MECHATROLINK-III is a communications link to connect industrial devices (such as smart
motor controllers, operator interfaces, and variable frequency drives) as well as control
devices (such as programmable controllers and computers) to a network.
MECHATROLINK-III is a simple, networking solution that reduces the cost and time to
wire and install factory automation devices, while providing interchangeability of like
components from multiple vendors.
Install the option/MIII option on a drive to perform the following functions from a
MECHATROLINK-III master device:
• Operate the drive
• Monitor the drive operation status
• Change drive parameter settings
u
Compatible Products
The option can be used with the products in Table 1 .
Table 1 Compatible Products
Note: 1. Refer to the option package labeling in the field designated “PRG” (four digit number)” or the option
labeling in the field designated “C/N” (S + four digit number)” to identify the option software version.
The labeling is located adjacent to the PCB.
2. For Yaskawa customers in the North or South America region:
If your product is not listed in Table 1 , refer to the web page below to confirm this manual is correct for
your product. The web page provides a list of option manuals by product, and a direct link to download
a PDF.
Scan QR code
Or refer to: http://www.yaskawa.com/optionlookup
Product Series Model(s) Software Version
<1>
<1> Refer to “PRG” on the drive nameplate for the software version number.
V1000 CIMR-V  A 
≥
1023
GEM_M-III_IM_E_conditional.fm 10 ページ ２０１７年７月７日 金曜日 午後５時９分