EN 4
YASKAWA ELECTRIC
TOEP C710617 17B YASKAWA AC Drive GA700 Initial Steps
NOTICE
Review the Braking Unit and Braking Resistor Unit Installation Manual TOBPC72060001 before connecting a
dynamic braking option to the drive. Failure to obey can cause damage to the drive and braking circuit.
NOTICE
Make sure that all connections are correct after installing the drive and connecting peripheral devices. Failure
to obey can cause damage to the drive.
NOTICE
Do not connect phase-advancing capacitors or LC/RC noise filters to the output circuits. Failure to obey can
cause damage to the drive, phase-advancing capacitors, LC/RC noise filters, and leakage breakers (ELCB, GFCI, or RCM/
RCD).
◆
Intended Use
This AC drive is electrical equipment that controls the speed and rotational direction of a motor in a commercial
application. Do not use this product for other functions.
1. Read and understand all safety precautions.
2. Wire and ground the drive as specified by all applicable standards and safety precautions.
3. Tightly attach all parts and protective covers.
4. Always use the product in the correct environmental conditions as specified in this manual.
DANGER
Electrical Shock Hazard. Make sure that all electrical connections are correct and install all drive covers
before energizing the drive. Use terminals for their intended function only. Incorrect wiring or ground connections, and incorrect
repair of protective covers can cause death or serious injury.
WARNING
Electrical Shock Hazard. Do not make changes to the drive body or drive circuitry. Failure to obey can cause
death or serious injury and will void warranty. Yaskawa is not responsible for changes to the product made by the user.
◆
Warranty and Exclusion of Liability
•
This product is not designed and manufactured for use in life-support machines or systems.
•
Contact a Yaskawa representative or your Yaskawa sales representative if you are considering the application of
this product for special purposes, such as machines or systems used for passenger cars, medicine, airplanes and
aerospace, nuclear power, electric power, or undersea relaying.
WARNING
Injury to Personnel. Yaskawa manufactured this product with strict quality-control guidelines. Install applicable
safety devices to minimize the risk of accidents when installing the product where its failure could cause a life-or-death situation,
loss of human life, or a serious accident or physical injury.
4
Moving the Drive
Obey local laws and regulations when moving and installing this product.
CAUTION
Crush Hazard. Do not hold the drive by the front cover or terminal cover. Tighten the screws correctly before
moving the drive. Failure to obey can cause minor to moderate injury.
Drive Weight
Persons Necessary to Move the Drive
< 15 kg (33 lbs.)
1
≥ 15 kg (33 lbs.)
2 + using appropriate lifting equipment
Refer to the drive Technical Manual for information about moving the drive with suspension systems, wires, or
hanging metal brackets.
