4.6 Application Selection
112
YASKAWA ELECTRIC
SIEP C710616 35D YASKAWA AC Drive E1000 Technical Manual
Table 4.8 Exhaust Fan: User Parameters (A2-01 to A2-16)
◆
Setting 4: HVAC Fan Application
Table 4.9 HVAC Fan: Parameter Settings
Table 4.10 HVAC Fan: User Parameters (A2-01 to A2-16)
◆
Setting 5: Compressor Application
Table 4.11 Compressor: Parameter Settings
Table 4.12 Compressor: User Parameters (A2-01 to A2-16):
No.
Parameter Name
No.
Parameter Name
b1-01
Frequency Reference Selection
E1-07
Mid Output Frequency
b1-02
Run Command Selection
E1-08
Mid Output Frequency Voltage
b1-04
Reverse Operation Selection
E2-01
Motor Rated Current
b3-01
Speed Search Selection at Start
H1-05
Multi-Function Digital Input Terminal S5 Function Selection
C1-01
Acceleration Time 1
H1-06
Multi-Function Digital Input Terminal S6 Function Selection
C1-02
Deceleration Time 1
H1-07
Multi-Function Digital Input Terminal S7 Function Selection
E1-03
V/f Pattern Selection
L5-01
Number of Auto Restart Attempts
No.
Parameter Name
Default Setting
A1-02
Control Method Selection
0: V/f Control
b1-04
Reverse Operation Selection
1: Reverse Prohibited
b1-17
Run Command at Power Up
1: Run command issued, motor operation start
C6-02
Carrier Frequency Selection
3: 8.0 kHz
H2-03
Terminals M5,M6 Function Selection
39: Watt Hour Pulse Output
L2-01
Momentary Power Loss Operation Selection
2: CPU Power Active - Drive will restart if power returns prior to control power
supply shut down.
L8-03
Overheat Pre-Alarm Operation Selection
4: Operation at lower speed
L8-38
Carrier Frequency Reduction
2: Enabled across entire frequency range.
No.
Parameter Name
No.
Parameter Name
b1-01
Frequency Reference Selection
d2-02
Frequency Reference Lower Limit
b1-02
Run Command Selection
E1-03
V/f Pattern Selection
b1-03
Stopping Method Selection
E1-04
Max Output Frequency
b1-04
Reverse Operation Selection
E2-01
Motor Rated Current
C1-01
Acceleration Time 1
H3-11
Terminal A2 Gain Setting
C1-02
Deceleration Time 1
H3-12
Terminal A2 Input Bias
C6-02
Carrier Frequency Selection
L2-01
Momentary Power Loss Operation Selection
d2-01
Frequency Reference Upper Limit
o4-12
kWh Monitor Initial Value Selection
No.
Parameter Name
Default Setting
A1-02
Control Method Selection
0: V/f Control
b1-04
Reverse Operation Selection
1: Reverse Prohibited
C1-01
Acceleration Time 1
5.0 s
C1-02
Deceleration Time 1
5.0 s
E1-03
V/f Pattern Selection
0FH
L2-01
Momentary Power Loss Operation Selection
1: Enabled
L3-04
Stall Prevention Selection during Deceleration
1: Enabled
No.
Parameter Name
No.
Parameter Name
b1-01
Frequency Reference Selection
E1-03
V/f Pattern Selection
b1-02
Run Command Selection
E1-07
Mid Output Frequency
b1-04
Reverse Operation Selection
E1-08
Mid Output Frequency Voltage
C1-01
Acceleration Time 1
E2-01
Motor Rated Current
C1-02
Deceleration Time 1
−
−
SIEP_C710616_35.book 112 ページ 2015年11月30日 月曜日 午後2時2分