YASKAWA CIMR-F7A, Instruction Manual

Page: 113 / 478

Digital Operation Display Functions and Levels
5-
3
Digital Operation Display Functions and Levels
The following figure shows the Digital Operator display hierarchy for the Inverter.
MENU
Drive Mode
Inverter can be operated and
its status can be displayed.
Quick Programming Mode
Minimum constants required
for operation can be monitored
or set.
Advanced Programming Mode
All constants can be monitored
or set.
Verify Mode
Constants changed from the
default settings can be moni-
tored or set.
Autotuning Mode
Automatically sets motor con-
stants if autotuning data (from
motor nameplate) is input for
open-loop vector control or to
measure the line-to-line resis-
tance for V/f control.
No. Function Page
U1 Status Monitor Constants 5-74
U2 Fault Trace 5-79
U3 Fault History 5-80
A1 Initialize Mode 5-8
A2 User-specified Setting Mode 5-9
b1 Operation Mode Selections 5-10
b2 DC Injection Braking 5-12
b3 Speed Search 5-13
b4 Timer Function 5-15
b5 PID Control 5-15
b6 Dwell Functions 5-17
b7 Droop Control 5-18
b8 Energy Saving 5-18
b9 Zero-Servo 5-19
C1 Acceleration/Deceleration 5-20
C2 S-curve Acceleration/Deceleration 5-21
C3 Motor Slip Compensation 5-22
C4 Torque Compensation 5-23
C5 Speed Control (ASR) 5-24
C6 Carrier Frequency 5-25
d1 Preset Reference 5-26
d2 Reference Limits 5-27
d3 Jump Frequencies 5-28
d4 Reference Frequency Hold 5-28
d5 Torque Control 5-29
d6 Field Weakening 5-31
E1 V/f Pattern 5-32
E2 Motor Setup 5-34
E3 Motor 2 V/f Pattern 5-36
E4 Motor 2 Setup 5-37
F1 PG Option Setup 5-38
F2 Analog Reference Board 5-40
F3 Digital Reference Board 5-41
F4 Analog Monitor Boards 5-42
F5 Digital Output Boards 5-43
F6 Communications Option Boards 5-44
H1 Multi-function Contact Inputs 5-45
H2 Multi-function Contact Outputs 5-47
H3 Analog Inputs 5-49
H4 Multi-function Analog Outputs 5-52
H5 MEMOBUS Communications 5-53
H6 Pulse Train 5-54
L1 Motor Overload 5-55
L2 Power Loss Ridethrough 5-57
L3 Stall Prevention 5-58
L4 Reference Detection 5-60
L5 Fault Restart 5-61
L6 Torque Detection 5-62
L7 Torque Limits 5-63
L8 Hardware Protection 5-64
N1 Hunting Prevention Function 5-66
N2 Speed Feedback Protection Control 5-67
N3 High-slip Braking 5-67
N5 Feed Forward 5-68
o1 Monitor Select 5-69
o2 Multi-function Selections 5-70
o3 Copy Function 5-72
T
Motor Autotuning
5-73