background image

4

YASKAWA ELECTRIC

 TOBP C720600 01E YASKAWA AC Drive Option CDBR-

D, LKEB-

 Installation Manual

1  Preface and Safety

1

Preface and Safety

Applicable Documentation

The following manuals are available for the option:

Terms

Registered Trademarks

Trademarks are the property of their respective owners.

CDBR Braking Unit, LKEB Braking Resistor Unit

YASKAWA AC Drive Option

Braking Unit, Braking Resistor 

Unit

Installation Manual

Manual No: TOBP C720600 01
(This book)

Read this manual first.
This guide is packaged together with the product and contains information 
necessary to install and setup the option.

Drive

YASKAWA AC Drive Manuals

Drive manuals contain basic installation and wiring information in addition 
to detailed parameter setting, fault diagnostic, and maintenance information. 
The most recent versions of these manuals are available for download on our 
documentation websites. Refer to the back cover of this manual for links to 
each regional site.

Note:

Indicates supplemental information that is not related to safety 

messages.

Drive:

• Varispeed G7-Series
• YASKAWA AC Drive 1000-Series

• YASKAWA AC Drive GA700
• YASKAWA AC Drive CH700
• YASKAWA AC Drive CR700

Option:

YASKAWA AC Drive Option CDBR Braking Unit, LKEB Braking 
Resistor Unit

Digital Operator:

• LCD Operator for YASKAWA AC Drive 1000-Series

• LED Operator for YASKAWA AC Drive 1000-Series
• LCD Keypad for YASKAWA AC Drive GA700, CH700, and CR700
• LED Keypad for YASKAWA AC Drive GA700, CH700, and CR700

TOBP_C720600_01E_9_0_E.book  4 ページ  2017年8月25日 金曜日 午後2時8分

Summary of Contents for CDBR-****D









































































Reviews: