YASKAWA ArcWorld 50, System Manual

Page: 72 / 126

3-8
183574-1CD
183574-1CD
3 Installation
3.3 Removal of System Components from Shipping Skids
ArcWorld 50/50S/52/52S
3.3 Removal of System Components from Shipping Skids
The ArcWorld components are attached to wooden shipping skids at the
factory, prior to shipment. The customer is responsible for removing the
shipping skids and inspecting the components for shipping damage.
1. Unbolt the ArcWorld components from the shipping skids using a
3/4-inch hex socket (see
Fig. 3 - 4
).
Figure 3 - 4: Typical Stabilizing Screw and Removal of A Shipping Lag Bolt
2. Discard or recycle the shipping skids and other shipping materials.
NOTICE
If there is any equipment damage, notify the shipping contractor as
soon as possible.
TYPICAL WORK
CELL COMPONENT
AIR IMPACT DRIVER WITH ¾ INCH
SOCKET
STABILIZING SCREW
(HOLLOW CORE)
SHIPPING BOL
T (HIDDEN BY
¾ INCH DRIVE SOCKET
NOTE – An air-powered tool is not required for removal of the shipping bolts, as these fasteners can be
removed with ordinary hand tools. However, the air-powered tool does make quick work of the
task.
(see NOTE)
WOODEN SHIPPING
PALLET
72 of 126