background image

19

Checking the Charge

If the battery pack does not charge properly:

• Check the current at the power outlet with another tool. Make sure that the outlet is not turned off.

Charger Maintenance

•  Keep the charger clean and clear of debris. Do not allow foreign material into the recessed cavity or on the contacts. Wipe 

with a dry cloth. Do not use solvents, wate

r

, or place in wet conditions.

•  Always unplug the charger when there is no battery pack in it.

•  Give the batteries a full charge before placing in storage. Do not recharge a fully charged battery pack. Overcharging 

shortens the battery life.

• Check that the charger contacts have not been shorted by debris or foreign material.

• If the surrounding air temperature is not normal room temperature, move the charger and battery pack to a location where the 

temperature is between 14 and 113˚ F (-10 and 45˚ C).

WARNING: 

If the battery is inserted into the charger when wa

r

m or hot, the CHECK BATTE

RY

 indicator light may switch on.  If 

this occurs allow the battery to cool outside of the charger for 30 minutes.

•  Recharge the battery pack anytime you notice there is less power.

•  Keep the charger stored in normal room temperature. Do not store it in excessive heat. Do not use in direct sunlight. Always 

recharge in a room temperature of 14 to 113˚ F (-10 to 45˚ C). If the battery pack is hot, let it cool down before recharging.

•  Disconnect the charger from the AC power outlet when not in use and once battery has reached a full charge.

OPERATING INSTRUCTIONS

   

 

With regular use, the battery pack will need 90 MINUTES or less to fully charge.  

Allow the battery to fully discharge before recharging.  It is recommended to charge 

the battery pack every 3 months when not in use.

1. Plug the charger into an AC power outlet.

2. Insert the battery pack into the charger, the power LED will turn red. Make sure 

    the latch and battery are fully inserted into the charger. 

3. Wait 5 seconds, the status LED will turn red, indicating a connection to the power 

    source and that the battery is charging. 

4. When the battery has become fully charged, the status LED will turn green. 

    The battery can be stored in the charger, as long as the charger is not plugged in.

NOTE: If the charging LED light flashes red it is advised to remove the battery from 

            the charger for storage.

NOTE : Si le charger A MENE allume clignote rouge il est conseillé d'enlever la pile du

             chargeur pour l'emmagasinage. 

4.                                                                      La lumière tournera VERT 

3. Apres 5 secondes, la DEL de charge rouge s'allume pour indiquer que la batterie est 

    connectee a la source de courant et qu'elle est en charge.

Summary of Contents for Grass trimmer/edger

























Reviews: