RULES FOR SAFE OPERATION
READ ALL INSTRUCTIONS
BEFORE OPERATING
When using the unit, follow all safety rules. Please read these
instructions before operating the unit in order to ensure the safety of the operator and
WARNING:
any bystanders. Please keep these instructions for later use.
Read the instructions carefully. Be familiar with the controls and proper use of the unit.
Do not operate this u
nit when tired, ill or un
der the influence of alcohol, drugs or
medication.
Children and teens under the age of 15 must not use the unit. Inexperienced users should
be under supervision of trained user.
Before each use, thoroughly inspect Blower/Vac for loose or damaged parts. Do not use
until adjustments or repairs are made.
All guards and safety attachments must be installed properly before operating the unit.
Inspect the area before starting the Blower/ Vac.
Remove all debris and hard or sharp objects such as glass, wire, etc. from surface to be
cleaned.
Use the unit only in daylight or in good artificial light.
Keep all bystanders, especially children and pets, at least 50’ (15 m) away from the unit
while operating.
ELECTRICAL SAFETY WARNINGS
When using electric gardening appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric shock and personal
injury. Carefully read and understand the entire operator's manual before using this
DANGER:
Blower/Vac. Read the operating instructions and safety warnings carefully.
Do not use the tool if the ON/OFF switch doesn’t turn OFF the tool.
Since the tool is double-insulated, a 2-wire extension cord (an extension cord without a
ground) may be used.
This tool is double-insulated and there are no user serviceable parts inside.
To reduce the risk of electrical shock, this unit has a polarized plug (one blade is wider
than the other). This unit will fit with a polarized plug in one way only. If the plug does not
fit fully into the unit, reverse the plug. If it still does not fit, use a cord with the correct
connection. Do not modify the Blower/Vac in any way.
WARNING:
To reduce the risk of electrical shock, use only SW-A, SOW-A,
STW-A, STOW-A, SJW-A, SJOW-A, SJTW-W or SJTOW-A cord types.
MINIMUM WIRE SIZE FOR EXTENSION CORDS FOR
120 VOLT APPLIANCES USING 0
-
12 AMPS*
Cord length (ft.)
25
50
100
150
Wire size (AWG)*
16
14
12
10
The wire size (AWG) for appliances using 12 A is 16 AWG for 25’, 14 AWG for 50’ and 12
AWG for 100’. Extensions cords of 150’ need to be gauge 10, but are not recommended.
- 3 -
Summary of Contents for 60-3866-8
Page 13: ...PARTS LIST 13 30...
