Assemble as a Vac
1. Turn off unit and unplug from electric outlet.
2. Twist the two vacuum tubes together until the arrow marks meet each other.
3. Insert tube into the bottom of the blower and turn clockwise to lock into place.
4. Insert the bag adaptor into the blower outlet of the blower, lock the bag adaptor with the
lock button. To remove the bag, simply press lock button and remove bag.
5. To remove vac tubes, twist tubes counter-clockwise.
NOTE:
It may be necessary to remove the blower tube or vac tubes to clear a blocked tube or
WARNING:
To prevent serious personal injury, make sure the switch is in the OFF
position, it is unplugged, and the impellers have stopped before attaching or
removing tubes.
impeller.
I
NSTALLING THE SHOULDER HARNESS
1. Push the strap through the centre of the buckle.
2. Pull the strap over the cross bar and down through the slot in the buckle.
3. Snap the clip on to the support fitting .
4. While standing in the operating position adjust the length to fit the operator's size. Pull the
tab to lengthen, pull the strap to shorten.
- 7 -
Fig. 4
Summary of Contents for 60-3866-8
Page 13: ...PARTS LIST 13 30...
