MAINTENANCE
14
IMPELLOR REPLACEMENT
1
2
3
4
5
6
7
8
9
10
11
12
spring
spacer washer
spacer washer
1. Remove the nut from the
left hand side of the impellor
shaft.
2. Remove the 10 screws
from the side cover.
3. Be sure not to lose the 2
springs.
4. Remove the nut from the
impellor shaft.
5. Remove the 3 screws
holding the pulley support
plate.
6. Remove the plate and the
two spacer washers.
7. Remove the pulley and
belt.
8. Remove the impellor shaft
nut from the right hand side.
9. Withdraw the impellor shaft
from the left hand side.
10. Withdraw the old /
damaged impellor. Be sure to
keep the 2 spacer washers
from the right hand side of the
impellor.
11. Insert the impellor shaft in
the new impellor and place
the 2 washers on the right
hand side.
12. Place the impellor and
shaft back into the front
scoop.
Summary of Contents for 060-3984-0
Page 19: ...EXPLODED VIEW 19...
