background image

WARRANTY

18

For TWO YEARS from the date of purchase within Canada, 

YARDWORKS CANADA

 will, at its 

option, repair or replace for the original purchaser, free or charge, any part or parts found to be 

defective in material or workmanship.

This warranty does not cover:

1. Any part which has become inoperative due to misuse, commercial use, abuse, neglect, 

accident, improper maintenance or alteration; or

2. The unit, if it has not been operated and/or maintained in accordance with the owner's 

manual;or

3.Normal wear, except as noted below;

4.Routine maintenance items such as impeller, blade sharpening;

5.Normal deterioration of the exterior finish due to use or exposure.

Full One Hundred Twenty Days Warranty on Normal Wear Parts: Normal wear parts are defined 

as blade adaptors, blades, grass bags and tires. These parts are warranted to the original 

purchaser to be free from defects in material and workmanship for a period of one hundred twenty 

(120) days from the date of retail purchase.

How to Obtain Service: Warranty service is available, with proof of purchase, through your local 

authorized service dealer or distributor. If you do not know the dealer or distributor in your area, 

please call toll free 1 866 523-5218.

The factory will not accept the return of a complete unit unless prior written permission has been 

extended by 

YARDWORKS CANADA

.

Transportation Charges: Transportation charges for the movement of any power equipment unit 

or attachment are the responsibility of the purchaser. The purchaser must pay transportation 

charges for any part submitted for replacement under this warranty unless such return is 

requested in writing by 

YARDWORKS CANADA

.

Other Warranties: All other warranties, express or implied, including any implied warranty of 

merchantability is limited in its duration to that set forth in this express limited warranty. The 

provisions as set forth in this warranty provide the sole and exclusive remedy of 

YARDWORKS 

CANADA

 obligations arising from the sale of its products.

YARDWORKS CANADA

 will not be liable for incidental or consequential loss or damage.

Summary of Contents for 060-3984-0





















Reviews: