background image

SAFETY RULES

7

This Owner's Manual describes safety and international symbols and pictographs that may appear 

on this product. Read this Owner's Manual carefully for complete information concerning safety, 

assembly instructions, operating instructions, and maintenance and repairs.

       SYMBOL                                                                  MEANING

• SAFETY ALERT SYMBOL

Indicates danger, warning, or caution. May be used in 

conjunction with other symbols or pictographs.

• WARNING - READ THE OWNER'S MANUAL

Read the Owner's Manual carefully and follow all warnings 

and safety instructions. Failure to do so may result in 

serious injury to the operator and/or bystanders.

• KEEP BYSTANDERS AWAY

WARNING: Keep all bystanders, and especially children 

and pets, at least 50 feet (15 m) away from the operating 

area.

• THROWN OBJECTS AND ROTATING CUTTER MAY 

CAUSE SEVERE INJURY

WARNING: Small objects can be propelled at high speed, 

causing injury. Keep away from the rotating rotor.

• SPINNING ROTOR MAY CAUSE SEVERE INJURY

WARNING: Keep hands, feet, and clothing away from the 

discharge area. Do not step in front of the Snow Thrower, 

and do not use hands to clean the rotor area while the 

Snow Thrower is plugged in.

• KEEP HANDS AND FEET AWAY

Summary of Contents for 060-3984-0





















Reviews: