model no. 060-3714-0 | contact us: 1.866.523.5218
REPLACING THE DRIVE BELT
•
Ensure that the snowthrower is not plugged in.
•
Remove the screws (1) and side wear pad (2) that secure the left side plate (3) to the
frame of the snowthrower. Remove the side cover.
•
Remove the old belt (4) from the small pulley (6) and large pulley (5).
•
Loop one end of the new belt over the small pulley.
•
Rotate the impeller with the left hand while positioning the belt on the large pulley with the
right hand.
•
Install the left side cover, and secure it using the screws that you previously removed.
1
2
3
5
6
4
Maintenance
22
