Yardworks 060-3714-0 Operator'S Manual Download Page 25

model no.  060-3714-0 |  contact us: 1.866.523.5218

2-YEAR LIMITED WARRANTY 

For TWO YEARS from the date of purchase 

within Canada, YARDWORKS CANADA 

will, at its option, repair or replace for the 

original purchaser, free or charge, any part 

or parts found to be defective in material or 

workmanship.

THIS WARRANTY DOES NOT COVER:

1.  Any part that has become inoperative 

due to misuse, commercial use, 

abuse, neglect, accident, improper 

maintenance, or alteration; 

2.  The unit, if it has not been operated 

and/or maintained in accordance with 

the owner’s manual; 

3.  Normal wear, except as noted below;

4.  Routine maintenance items such as 

lubricants, blade sharpening; or 

5.  Normal deterioration of the exterior 

finish due to use or exposure.

Full One Hundred Twenty Days Warranty on 

Normal Wear Parts: Normal wear parts are 

defined as blade adaptors, blades, grass 

bags and tires. These parts are warranted to 

the original purchaser to be free from defects 

in material and workmanship for a period of 

one hundred twenty (120) days from the date 

of retail purchase.

How to Obtain Service: Warranty service is 

available by calling the toll-free helpline at 

1.866.523.5218. The factory will not accept 

the return of a complete unit unless prior 

written permission has been extended by 

YARDWORKS CANADA.

Transportation Charges: Transportation 

charges for the movement of any power 

equipment unit or attachment are the 

responsibility of the purchaser. The 

purchaser must pay transportation charges 

for any part submitted for replacement under 

this warranty unless such return is requested 

in writing by YARDWORKS CANADA.

Other Warranties: All other warranties, 

express or implied, including any implied 

warranty of merchantability is limited in 

its duration to that set forth in this express 

limited warranty. The provisions as set 

forth in this warranty provide the sole and 

exclusive remedy of YARDWORKS CANADA 

obligations arising from the sale of its 

products.

Imported by Yardworks Canada, Toronto, 

Canada M4S 2B8.

Made in China

YARDWORKS CANADA will not be liable for incidental 

or consequential loss or damage.

25

W

arr

anty

Summary of Contents for 060-3714-0


























Reviews: