background image

Operating Tips

15

MOWING TIPS

… 6OEFSDFSUBJODPOEJUJPOTTVDIBTWFSZUBMMHSBTTJU

may be necessary to raise the height of cut to reduce 
pushing effort and to keep from overloading the engine 
and leaving clumps of grass clippings. It may also be 
necessary to reduce ground speed and/or run the lawn 
mower over the area a second time.

… 'PSFYUSFNFMZIFBWZDVUUJOHSFEVDFUIFXJEUIPGDVUCZ

overlapping previously cut path and mow slowly.

… 'PSCFUUFSHSBTTCBHHJOHBOENPTUDVUUJOHDPOEJUJPOT

the engine speed should be set in the fast position.

… 1PSFTJODMPUIHSBTTDBUDIFSTDBOCFDPNFªMMFEXJUI

dirt and dust with use and catchers will collect less 
grass. To prevent this, regularly hose catcher off with 
water and let dry before using.

… ,FFQUPQPGFOHJOFBSPVOETUBSUFSDMFBSBOEDMFBOPG

HSBTTDMJQQJOHTBOEDIBGG5IJTXJMMIFMQFOHJOFBJS«PX

and extend engine life.

MULCHING MOWING TIPS

IMPORTANT: 

For best performance, keep mower 

IPVTJOHGSFFPGCVJMUVQHSBTTBOEUSBTI4FF¡$MFBOJOH¢JO

the Maintenance section of the operator’s manual.

… 5IFTQFDJBMNVMDIJOHCMBEFXJMMSFDVUUIFHSBTT

clippings many times and reduce them in size so that 
as they fall onto the lawn they will disperse into the 
grass and not be noticed. Also, the mulched grass will 
biodegrade quickly to provide nutrients for the lawn. 
ALWAYS mulch with your highest engine (blade) 
speed as this will provide the best recutting action of  
the blades.

… "WPJEDVUUJOHZPVSMBXOXIFOJUJTXFU8FUHSBTTUFOET

to form clumps and interferes with the mulching action. 
The best time to mow your lawn is the early afternoon. 
At this time the grass has dried, yet the newly-cut area 
will not be exposed to direct sunlight.

… 'PSCFTUSFTVMUTBEKVTUUIFMBXONPXFSDVUUJOHIFJHIU

so that the lawn mower cuts off only the top one-
third of the grass blades (Figure A). If the lawn is 
overgrown it will be necessary to raise the height of cut 
to reduce pushing effort and to keep from overloading 
the engine and leaving clumps of mulched grass. For 
extremely heavy mulching, reduce your width of cut by 
overlapping previously cut path and mow slowly.

… $FSUBJOUZQFTPGHSBTTBOEHSBTTDPOEJUJPOTNBZ

require that an area be mulched a second time to 
completely hide the clippings. When doing a second 

DVUNPXBDSPTT QFSQFOEJDVMBSUPUIFªSTUDVUQBUI

… $IBOHFZPVSDVUUJOHQBUUFSOGSPNXFFLUPXFFL.PX

north to south one week, then east to west the next 
week. This will help prevent matting and graining of the 
lawn.

MAX 1/3

FIGURE A

CAUTION: DO NOT use de-thatcher blade 
attachments on your mower. Such attachments 
are hazardous, will damage your mower, and 
could void your warranty. 

model numbers  060-1662-4  |  060-1663-2  |  060-1664-0  |  060-1665-8  |  contact us: 1.866.523.5218

Summary of Contents for 060-1662-4



















Reviews: