Yardworks 060-1662-4 Instruction Manual Download Page 14

14

2. Ensure that the rear door

locks into the 

EZ bag

access

(IF EQUIPPED).

3. Place the 

grass catcher

frame hooks onto the
grass bag brackets.

NOTE:

 For clarity, rear door 

is not shown.

4. Pull theo

perator

presence control bar

down to the upper handle.

5. Rear door will release

from the 

EZ bag access

(IF EQUIPPED) and rest
on 

grass catcher.

NOTE: DO NOT

 force the door shut. ALWAYS use the

operator presence control bar.

6. Ensure that rear door covers any gap between mower

deck and bagging unit.

7. To convert to mulching or discharging operation,

remove 

grass catcher

 and close the rear door.

SIDE DISCHARGING

IMPORTANT: 

THE REAR 

DOOR (IF EQUIPPED) 

MUST BE CLOSED.

1. Open the 

mulch door.

2. Install the discharge

EF«FDUPS VOEFS UIF EPPS

as shown. The mower is
now ready for discharging
operation.

NOTE:

 To convert to mulching or bagging operation, side 

mulch door must be closed and if equipped with a latch, 
the latch should be in the locked position.

MULCH/DISCHARGE 
GUARD
1. Open the 

mulch door.

2. Install the 

mulch/

discharge guard

 under

the door as shown. The
mower is now ready for
mulching operation.

SIMPLE STEPS TO 
REMEMBER WHEN 
CONVERTING YOUR LAWN MOWER

FOR MULCHING

… 5IF SFBS EPPS JT DMPTFE

… 5IF NVMDI EPPS JT DMPTFE BOE JG FRVJQQFE XJUI B MBUDI

the latch is locked.

FOR REAR BAGGING

… 5IF HSBTT DBUDIFS JT JOTUBMMFE

… 5IF NVMDI EPPS JT DMPTFE BOE JG FRVJQQFE XJUI B MBUDI

the latch is locked.

FOR SIDE DISCHARGING

… 5IF SFBS EPPS JT DMPTFE

… 5IF EJTDIBSHF EF«FDUPS JT JOTUBMMFE

3

3

4

5

Operation

2

1

1

2

 

CAUTION: DO NOT run your lawn mower 
without the rear door closed or an approved 
grass catcher properly installed. NEVER 
attempt to operate the mower with the rear 
door removed or propped open. Serious 
injury may result from operating the mower 
with the rear discharge open. 

model numbers  060-1662-4  |  060-1663-2  |  060-1664-0  |  060-1665-8  |  contact us: 1.866.523.5218

Summary of Contents for 060-1662-4



















Reviews: