model no.
060-0550-6
| contact us: 1.866.523.5218
model no.
060-0550-6
| contact us: 1.866.523.5218
31
A
SS
eMBL
y
CAUTION: Red shipping plugs must
be removed from hydraulic pump prior to
installing hoses.
Hydraulic pump may contain residual oil from
testing procedures during production. We
recommend using an oil tray under the pump
before removing the shipping plugs.
NOTICe: Some hoses may be preassembled by the factory, check your hoses per below
instructions to ensure proper assembly.
Oil Inlet (High Pressure)
–
This hose is black and has a swivel nut on both ends.
–
The Oil Inlet Hose sends hydraulic oil from the pump to the control valve/cylinder.
–
Hose connections do NOT require thread seal tape. The O-ring seals against the face of the
fittings on the pump and hose.
Oil Return Hose (Low Pressure)
–
This hose is black and has a swivel nut on both ends.
–
The Oil Return Hose returns hydraulic oil from the control valve/cylinder to the tank.
–
Hose connections do NOT require thread seal tape. This hose has a tapered JIC hydraulic
fitting that allows the connection to seal when tightened and will only fit on the correct
connection.
Suction Hose
–
This is the clear hose that connects the hydraulic tank to the pump inlet.
–
Secure both ends of hose with spring loaded hose clamps.
