model no.
060-0550-6
| contact us: 1.866.523.5218
O
Pe
RA
TION
model no.
060-0550-6
| contact us: 1.866.523.5218
52
WARNING: Never operate a damaged or defective log splitter.
WARNING: Improper maintenance will void your warranty.
NOTICe: For Emission control devices and systems, read and understand your responsibilities
for service as stated in the Emission Control Warranty Statement of this manual.
CAUTION: DO NOT spray engine with water.
Water can contaminate the fuel system and can enter the engine through the cooling slots and
damage the engine.
Make certain that the log splitter is kept clean and stored properly. Only operate the unit
on a flat, level surface in a clean, dry operating environment. DO NOT expose the unit to
extreme conditions, excessive dust, dirt, moisture or corrosive vapors. Inspect all air vents
and cooling slots to ensure that they are clean and unobstructed.
Clean spark arrester every 100 hours.
Check and tighten all bolts and nuts before operating the log splitter.
The owner/operator is responsible for all periodic maintenance.
Complete all scheduled maintenance in a timely manner.
Correct any issue before operating the log splitter.
For service or parts assistance, contact our Technical Support Team at 1-877-338-0999.
CLeANING THe LOG SPLITTeR
Keep exterior surfaces of the engine free from dirt and debris to maintain proper engine
cooling and performance.
Use a soft bristle brush or an air compressor nozzle (25 PSI) to clear dirt and debris away
from the engine surfaces.
To prevent rust and corrosion on metal parts and after cleaning, use a rust & corrosion
inhibitor for preventative maintenance.
