model no.
060-0550-6
| contact us: 1.866.523.5218
42
A
SS
eMBL
y
BeFORe eACH USe INSPeCT THe LOG SPLITTeR
1. Check the hydraulic oil level and visually inspect all hoses, attachments and cylinder
for loose fittings, leaks, cracks, fraying or other damage.
2. DO NOT operate the log splitter if there is any indication of damage.
3. Inspect the engine and make sure the oil level is correct before operating. If the engine
is equipped with a spark arrestor, clean and inspect it regularly (follow spark arrestor
maintenance schedule).
4. The tires need to be fully inflated and in good repair. Reference the tire sidewall for
recommended tire pressure.
CHANGING BeAM FROM HORIZONTAL
TO VeRTICAL ORIeNTATION
When logs are too heavy to lift, log splitter
beam can be moved from horizontal to
vertical orientation.
To change from horizontal to vertical
orientation:
1. Block the wheels to prevent the unit
from rolling.
2. Pull the spring loaded pin out on the
horizontal beam lock attached to the
tow bar to release the beam. Standing
alongside the hydraulic ram, (opposite
side from the engine) firmly grasp the
handle on the beam and lift upward
while pushing the beam back until
upright. (Caution, beam is heavy.)