25
Hardware
Wood Parts
#8 x 1-1/2” Wood Screws
x 20 per assembly
Fig. 8.5
Step 8: Small Roof Rafter Assembly
Part 2
40 x #8 x 1-1/2” Wood Screw
8 x #8 x 2-1/4” Wood Screw
2 x (337) Strap Short 31.8 x 82.6 x 1561.3 mm (1-1/4 x 3-1/4 x 61-7/16”)
2 x (437) Strap 31.8 x 82.6 x 2603.5 mm (1-1/4 x 3-1/4 x 102-1/2”)
2 x (442) Rafter Short Right 31.8 x 76.2 x 1040.2 mm (1-1/4 x 3 x 40-15/16”)
2 x (441) Rafter Short Left 31.8 x 76.2 x 1040.2 mm (1-1/4 x 3 x 40-15/16”)
D:
Place one (337) Strap Short in the notches of (438) Rafter Corner Left, (439) Rafter Corner Right and (440)
Rafter so the ends do not overhang the outside edges of the outside boards then attach with six #8 x 1-1/2”
Wood Screws. (Fig. 8.5)
E:
Place one (437) Strap in the notches of (438) Rafter Corner Left, (439) Rafter Corner Right and (440) Rafter
so the ends do not overhang the outside edges of the outside boards. Do not attach yet. (fig. 8.5)
F:
Place one (442) Rafter Short Right and one (441) Rafter Short Left in the notches of (437) Strap and attach
as shown in fig. 8.5 with four #8 x 1-1/2” Wood Screws and two #8 x 2-1/4” Wood Screws per board.
G:
Attach (437) Strap to (438) Rafter Corner Left, (439) Rafter Corner Right and (440) Rafter with six #8 x
1-1/2” Wood Screws. (fig. 8.5)
H:
Complete Steps D, E, F and G for both Small Roof Rafter Assemblies.
(440)
Rafter
No
Overhang
Fascia Beam
Assembly
Flush
(438) Rafter
Corner Left
(439) Rafter
Corner Right
Flush
(337) Strap
Short
(441) Rafter
Short Left
(437) Strap
(442) Rafter
Short Right
#8 x 2-1/4”
Wood Screws
#8 x 2-1/4”
Wood Screws
