22
Note: The bevelled ends on each gusset should always face away from the wood it is attaching to.
A:
Make sure the assembly is still square and level then facing one Long or Short Beam Assembly place one
(330) Gusset Right on the right hand side so the top fits tight to the Beam Assembly and the bottom fits tight to the
Post Assembly. Attach gusset to Beam Assembly with two 5/16 x 3-3/4” Hex Bolts (with 5/16” lock washer, 1/4-
5/16” large washer and 5/16” t-nut). Pre-drill with a 1/8” drill bit then attach gusset to Post Assembly with two 5/16
x 3” Lag Screws (with 1/4-5/16” large washer). (fig. 6.1, 6.2 and 6.3)
B:
Repeat Step A on the left hand side with one (331) Gusset Left. (fig. 6.1, 6.2 and 6.3)
C:
Repeat Steps A and B for each Beam Assembly/Post Assembly. (fig. 6.1, 6.2 and 6.3)
D:
At each corner, tight to the outside edges of the joining Beam Assemblies attach one Roof to Post Bracket with
two #10 x 1-1/4” Pan Screws. (fig. 6.3 and 6.4)
Step 6: Attach Gussets and Roof Brackets
Fig. 6.1
Tight
4 x (330) Gusset Right 38.1 x 190.5 x 1003.3 mm (1-1/2 x 7-1/2 x 39-1/2”)
4 x (331) Gusset Left 38.1 x 190.5 x 1003.3 mm (1-1/2 x 7-1/2 x 39-1/2”)
Hardware
Wood Parts
16 x 5/16 x 3” Lag Screw (1/4-5/16” large washer)
16 x 5/16 x 3-3/4” Hex Bolt
(5/16” lock washer, 1/4-5/16” large washer, 5/16” t-nut)
8 x #10 x 1-1/4” Pan Screw
4 x Roof to Post Bracket
Fig. 6.2
(330) Gusset
Right
Roof to Post
Bracket
#10 x 1-1/4”
Pan Screw
(331) Gusset
Left
Long Beam
Assembly
Post
Assembly
(330) Gusset
Right
(331) Gusset
Left
Long Beam
Assembly
Post
Assembly
Short Beam
Assembly
5/16 x 3”
Lag Screw
5/16”
T-nut
5/16” Lock
Washer
5/16 x 3”
Lag Screw
1/4-5/16”
Large Washer
5/16 x 3-3/4”
Hex Bolt
5/16 x 3-3/4”
Hex Bolt
Fig. 6.3
Fig. 6.4
(331)
Gusset
Left
(331) Gusset
Left
(331) Gusset
Left
(330)
Gusset
Right
(331) Gusset
Left
Short Beam
Assembly
Long Beam
Assembly
Short Beam
Assembly
1/4-5/16”
Large Washer
1/4-5/16”
Large Washer
