16
5/16”
T-nut
Step 3: Short Beam Assembly
Part 1
Hardware
Wood Parts
A:
Connect one (451) Beam Short Left and one (452) Beam Short Right using two 5/16 x 1-1/2” Hex Bolts (with
5/16” lock washer, 1/4-5/16” large washer and 5/16” t-nut) as shown in fig. 3.1 and 3.2.
B:
Connect one (449) Beam Short End to each end of one (450) Beam Short Centre using two 5/16 x 1-1/2” Hex
Bolts (with 5/16” lock washer, 1/4-5/16” large washer and 5/16” t-nut) per end as shown in fig. 3.1 and 3.2.
C:
Repeat Steps A and B one more time to make two Short Beam L-R Assemblies and two Short Beam End
Assemblies.
(451) Beam
Short Left
4 x (449) Beam Short End 38.1 x 139.7 x 558.6 mm (1-1/2 x 5-1/2 x 22”)
2 x (450) Beam Short Centre 38.1 x 139.7 x 2422.1 mm (1-1/2 x 5-1/2 x 95-3/8”)
2 x (451) Beam Short Left 38.1 x 139.7 x 1769.7 mm (1-1/2 x 5-1/2 x 69-11/16”)
2 x (452) Beam Short Right 38.1 x 139.7 x 1769.7 mm (1-1/2 x 5-1/2 x 69-11/16”)
Fig. 3.1
12 x 5/16 x 1-1/2” Hex Bolt
(5/16” lock washer, 1/4-5/16” large washer, 5/16” t-nut)
Fig. 3.2
1/4-5/16”
Large Washer
5/16 x 1-1/2”
Hex Bolt
Tight
(452) Beam
Short Right
(450) Beam
Short Centre
(449) Beam
Short End
5/16” Lock
Washer
(449) Beam
Short End
Make sure bolt heads
are on the outside of
each Beam Assembly
