manualshive.com logo in svg

Yardistry YM11909, Installation And Operating Instructions Manual

Share
Download
Yardistry YM11909 Installation And Operating Instructions Manual Download Page 14

 14 

[email protected]

5/16 x 3 - Y07718-330, 5/16 x 2 -Y07718-320

#8 x 3”  Wood Screw Y06091-530

Y50000-833 -Gable Beam, Y50000-832 -Gable Inside

Y50000-848 - Gable End 

5/16 x 3 - Y07718-330, 5/16 x 2 -Y07718-320

#8 x 3”  Wood Screw Y06091-530

Y50000-833 -Gable Beam, Y50000-832 -Gable Inside

Y50000-848 - Gable End 

Step 3: Gable Beam Assembly

Hardware

Wood Parts

A:

  Place two (833) Gable Beams tight together, then place one (846) Gable Upright Assembly centred, on one side 

of (833) Gable Beams and one (832) Gable Inside on the other side.  (832) Gable Inside to be flush to top of (833) 

Gable Beams.  Loosely attach (846) Gable Upright Assembly to (833) Gable Beams and (832) Gable Inside with 

one 5/16 x 3” Hex Bolt (with 5/16” lock washer, 1/4-5/16” large washer and 5/16” t-nut) in the top hole and 5/16 x 

2” Hex Bolt (with 5/16” lock washer, 1/4-5/16” large washer and 5/16” t-nut) in the bottom hole.  

Note:  Bolt holes to 

the bottom of each (833) Gable Beam.

  (F3.1 and F3.2)

B:

  Attach (832) Gable Inside to (833) Gable Beams with six #8 x 1-3/4” Wood Screws.  Tighten bolts from Step A.  

(F3.1 and F3.2)

C:

  Place one (848) Gable End tight to each side of (832) Gable Inside, flush to the top of (833) Gable Beams then 

attach with three #8 x 1-3/4” Wood Screws per board.  (F3.1 and F3.2)

D:

  Repeat Steps A - C one more time to make a second Gable Beam Assembly.

F3.1

2 x 5/16 x 2” Hex Bolt 

      (5/16” lock washer, 1/4-5/16” large washer, 5/16” t-nut)
2 x 5/16 x 3” Hex Bolt 

      (5/16” lock washer, 1/4-5/16” large washer, 5/16” t-nut)
24 x #8 x 1-3/4” Wood Screw

1/4 - 5/16” 

Large Washer

5/16 x 2” 

Hex Bolt

5/16” 

T-nut

Flush

(848) Gable End

(833) Gable 

Beam

Front

4 x (833) Gable Beam  
2 x (846) Gable Upright Assembly
2 x (832) Gable Inside  
4 x (848) Gable End

(846) Gable 

Upright 

Assembly

5/16” Lock 

Washer

#8 x 1-3/4” 

Wood Screw 

x 12

Notice holes 

on bottom of 

both boards

(833) Gable 

Beam

(832) Gable 

Inside

F3.2

Back

5/16 x 3” 

Hex Bolt

(848) Gable End

Flush and 

Tight

Flush

(846) Gable 

Upright 

Assembly

(848) Gable End

(832) Gable 

Inside

(848) Gable End

Notice the 

direction the 

bolts are being 

installed.

Notice bolt 

hole on top of 

board

(833) Gable 

Beam

Summary of Contents for YM11909









































Reviews:

No comments

Brands by name

Popular brands

Load more brands