YARDGARD SELECT
™
- FENCE FRAMEWORK INSTALLATION INSTRUCTIONS
PAGE 7
PAGE 6
YARDGARD SELECT
™
- FENCE FRAMEWORK INSTALLATION INSTRUCTIONS
TENSION WIRE (1000-034-747)
TENSION WIRE (1000-034-747)
QTY.
K
Tension Wire
200´ Roll
1
Panel-to-Wire Clip
100
STAGE 2: FENCE PANEL INSTALLATION
2
FENCE PANELS (1000-034-736)
FENCE PANELS (1000-034-736)
QTY.
L
8’ Fence Panel Section
3
M
Panel Clip
12
TOOLS AND MATERIALS
Installing Tension Wire
• Tape Measure
• Screwdriver (Phillips/Blade)
•
Adjustable Wrench
• Wire Cutter
• Adjustable Pliers
• Cordless Drill
Installing Fence Panels
• Wire Cutter
STAGE 2: FENCE PANEL INSTALLATION
2
STEP 1:
INSTALLING TENSION WIRE
• Position the tension band 3˝ from the ground (Fig. 12).
• Attach the tension wire ratchet (included in the Post Hardware
Kit) to the tension band and tighten carriage bolt using an
adjustable wrench (Fig. 12).
• Duplicate this step at the opposite corner, end, or gate post.
• Measure the distance between the two posts and add 1˝ to
that measurement. Cut tension wire to size. (Fig. 13)
• Thread tension wire through hole in first ratchet and wrap us
-
ing adjustable wrench making 3 to 4 rotations (Fig. 13 and 14).
• Stretch tension wire to tension wire ratchet at the opposite end
of the fence line. Repeat the steps above and rotate until wire
is tight.
• Repeat for each fence line.
Fig . 12 Tension Band Installation
Fig . 13 Tension Wire Insertion
Fig . 14 Tighten Tension Wire
STAGE 2: PARTS LIST
3
˝
Tension Band
Tension Wire Ratchet
Insert tension wire
through holes
Adjustable Wrench
