Step 2.
Thread eight 6 3/8” threaded rods (6C) into the 56” 2x6’s.
Turn them in by hand until they are flush with the t-nuts.
Step 3.
Place two 54” 4x4 posts (1A) and two 74” 4x4 (1L) in place.
These are pre-drilled for the threaded rods, notice how the holes
are offset and need to align with the holes in the 2x6’s.
Step 4.
Fasten the 4x4 posts in place with washers and acorn nuts over
the threaded rods. (6E) (6D)
Only hand tighten these at this point.
Step 1.
Begin the 5ft platform assembly by locating the two 56” 2x6’s (1C)
with the joist hangers attached. Place them as shown with the
joist hangers facing in.
Next place the two 73 1/2” 2x6’s (1B) on the outside.
