![background image](http://html1.mh-extra.com/html/yardcraft/polaris-vinyl-playset/polaris-vinyl-playset_assembly-manual_3179834030.webp)
Fasten short angle of brace 2x4 to ground runner using
two 4 1/8" bolts. Tighten immediately.
Fasten long angle to end ladder using 4" lag. Pre-
drilling is recommended.
Your climbing ladder assembly is now complete.
Step
10
:
Step
9
:
Climbing Set Assembly
Now is a good time to go over the entire set and be
sure all bolts and nuts are properly installed and
tightened.
The next step is to install any components you may
have purchased. Assembly instructions for the
components can be found on pages 3
1
-3
5
.
30