background image

Keith McMillen

I N S T R U M E N T S

©2009 Kesumo, LLC. All rights reserved.

For more information visit our website at www.Batt-O-Meter.com

O

+

Keith McMillen

I N S T R U M E N T S

TM

TM

TM

TM

TM

TM

- -

TM

The Musician’s Battery Tester

Model # KS700-0658

Owner’s Manual

A GUIDE TO HELP  YOU GET STARTED

WELcOmE!

Thank you and congratulations on your decision to own the Batt-O-Meter:  
the musician’s battery tester.

Features

The Batt-O-Meter is a computer-controlled  
voltage and current measurement system.

The Batt-O-Meter is capable of testing:

State of the battery powering musical 

• 

instruments, as well as hours of use left
State of the battery of 9V devices, as well as 

• 

hours of use left
State of standalone 9V, 1.5V (AA & AAA),  

• 

and 3V batteries
All of its internal functions

• 

Condition of the power probe

• 
State of its own battery The Batt-O-Meter is  
able to perform this exhaustive self test because  
it implements precision equipment only  
recently available. 

ImPORTAnT nOTES

Power

This unit requires a 9 volt battery for operation, 
not included.

PREcAUTIOnS

Do not subject the unit to temperature extremes 
(e.g., direct sunlight in an enclosed vehicle).  Avoid 
using or storing the unit in dusty or humid areas, 
or areas that are subject to high levels of vibration.
Protect the unit from strong impact.
Should a malfunction occur, or if you suspect there 
is a problem, discontinue use immediately. Contact 
qualified service personnel as soon as possible.
To avoid the risk of electric shock, do not open 
the unit.

Installing & Changing the Battery

While pressing on the tabs of the battery door in 
the back of the Batt-O-Meter, open the case, and 
insert the 9 volt battery.  Battery life may differ 
according to the conditions of use. Remove the 
battery whenever the unit is to remain unused for 
an extended period of time.

Summary of Contents for Batt-O-Meter KS700-0658

Page 1: ... of its own battery The Batt O Meter is able to perform this exhaustive self test because it implements precision equipment only recently available Important Notes Power This unit requires a 9 volt battery for operation not included Precautions Do not subject the unit to temperature extremes e g direct sunlight in an enclosed vehicle Avoid using or storing the unit in dusty or humid areas or areas...

Page 2: ...truments use a standard stereo1 4 diameter phone plug and jack These instruments and devices sense the insertion of the 1 4 mono plug to turn on the power Figure 1 The Batt O Meter can measure critical information that lets you know how much longer the battery will work without making direct contact to the positive contact of the battery usually required Usingthe Batt O Meter SelfTest Start by hol...

Page 3: ...the input of the 9Volt device you are testing Figure 3 3 Hold the power button down to run the test You will see the following display 1 Chem AL rC or CA the one selected by you 2 UoL 3 Voltage in number 4 Hr 5 Number of hours left to power device If the battery tested is low then you will see the following sequence 1 Chem AL rC or CA the one selected by you 2 UoL 3 Voltage in number 4 Flashing Lo...

Page 4: ...the battery tested is low then you will see the following sequence 1 Chem AL rC or CA the one selected by you 2 UoL 3 Voltage in number 4 Flashing Lo Uxpected Results There are a few circumstances under which you will get unexpected results when using the Batt O Meter or the test will fail If the wrong type of chemistry is selected when testing a battery or device there will be a slight difference...

Reviews: