![background image](http://html1.mh-extra.com/html/yardcraft/nova-playset/nova-playset_assembly-manual_3176382010.webp)
Step 5.
Find the 4x4 end post (3B) and install it in the beam strap.
Make sure the post is square with the swing beam then tighten all
the nuts.
Step 6.
Attach the corner bracket (3F) to the swing beam and end post.
Fasten it with 1 3/4” washer head screws.
Step 7.
Lift the swing beam up into place on the tower.
Step 4.
Install the beam strap (3E) on the other end of the beam using the
same 4 7/8” threaded rods.
Only finger tighten the nuts at this point.