CLEARING A BLOCKED TUBE / IMPELLER
EMPTYING THE SNAP-ON BAG
PAPER BAG DISPOSAL
Fig. 26
OPERATING INSTRUCTIONS
20
1. Slide the Power/Speed switch to the OFF position, and wait until the Blower/Vac comes to a complete stop (Fig. 19).
2. Unplug the Blower/Vac.
3. Remove the Blower/Vac tube and the snap-on bag.
4. Carefully remove that material that is blocking the tube or impeller. Inspect the blades in order to verify that no damage
has occurred. Rotate the impeller blades by hand in order to ensure that the blockage is completely cleared.
5. Reinstall the snap-on bag and the Blower/Vac tube.
6. Plug the Blower/Vac back into the power supply.
Once the bag is full, it may be placed at the curb-side for pick-up. This bag is biodegradeable and environmentally-friendly.
Please check with municipal solid waste collection bylaws for disposal and pick-up times.
NOTE: In order to avoid deterioration and obstructing the air flow, which will reduce the performance of the vacuum, empty
the bag after each use.
1. Unplug the Blower/Vac.
2. Press the latching tabs on both sides of the bag tube, and pull the bag down away from the Blower/Vac (Fig. 26).
3. Detach the snap-on bag from the bag hook.
4. Unzip the bag, and empty the contents into a garbage bag or container.
5. Turn the bag inside-out after emptying it, and vigor-ously shake out the remaining dust and debris.
6. Turn the bag right-side-out, zip it closed, and re-install it.
7. Plug the Blower/Vac back into the power supply.
WARNING:
In order to avoid serious personal injury, always wear gloves to protect the hands from the impeller
blades.
WARNING:
In order to avoid serious personal injury, do not unzip or remove the bag while the Blower/Vac is
running.
WARNING:
Wear eye protection and a dust mask when emptying the vacuum bag.
WARNING:
In order to avoid serious personal injury, verify that the Blower/Vac is turned off and unplugged
before clearing the impeller.
Vac
Blow
