background image

Gen eral  Ser vice:

Never run an en gine in doors or in a poorly ven ti lated 
area.  En gine  ex haust  con tains  car bon  mon ox ide,  an
odor less and deadly gas.

Be fore  clean ing,  re pair ing,  or  in spect ing,  make  cer -
tain the blade and all mov 

ing parts have stopped.

Dis con nect the spark plug wire and ground against
the en gine to pre vent un in tended start ing. 

Check the blade and en gine mount ing bolts at fre -
quent in 

ter 

vals for proper tight 

ness. Also, vi 

su 

ally

in spect blade for dam age (e.g., bent, cracked, worn) 
Re place blade with the orig i nal equip ment man u fac -
ture’s (O.E.M.) blade only, listed in this man ual. “Use 
of parts which do not meet the orig 

nal equip 

ment

spec i fi ca tions  may  lead  to  im proper  per for mance
and  com pro mise  safety!”

Mower blades are sharp and can cut. Wrap the
blade or wear gloves, and use ex 

tra cau 

tion when

ser vic ing  them.

Keep all nuts, bolts, and screws tight to be sure the
equip ment is in safe work ing con di tion.

Never tam per with safety de vices. Check their proper 
op er a tion  reg u larly.

Af ter strik ing a for eign ob ject, stop the en gine, dis -
con nect the spark plug wire and ground against the
en gine. Thor oughly in spect the mower for any dam -
age. Re pair the dam age be fore start ing and
op er at ing  the  mower.

Never at tempt to make a wheel or cut ting height ad -
just ment while the en gine is run ning.

Grass catcher com 

po 

nents, dis 

charge cover, and

trail shield are sub 

ject to wear and dam 

age which

could ex 

pose mov 

ing parts or al 

low ob 

jects to be

thrown. For safety pro tec tion, fre quently check com -
po nents  and  re place  im me di ately  with  orig i nal
equip ment man u fac turer’s (O.E.M.) parts only, listed
in this man ual. “Use of parts which do not meet the
orig i nal  equip ment  spec i fi ca tions  may  lead  to  im -
proper  per for mance  and  com pro mise  safety!

Do not change the en 

gine gov 

er 

nor set 

ting or

overspeed the en 

gine. The gov 

er 

nor con 

trols the

max i mum safe op er at ing speed of the en gine.

Main tain or re place safety la bels, as nec es sary.

Ob 

serve proper dis 

posal laws and reg 

la 

tions. Im 

-

proper dis posal of flu ids and ma te ri als can harm the
en vi ron ment.

Your  Re spon si bil ity

Re 

strict the use of this power ma 

chine to per 

sons

who read, un der stand and fol low the warn ings and
in struc tions in this man ual and on the ma chine. 

SI-102

10.6.04

5

Summary of Contents for 070 Series

































Reviews: